Advanced Energy Technology Group
Center for Energy Research
 
 
 
 
 
Mark S. Tillack
Research Scientist and Lecturer

Ph.D., Massachusetts Institute of Technology, 1983.
Nuclear Engineering

Tel: (858) 534-7897
Fax: (858) 822-2120
e-mail: mtillack@ucsd.edu

Mailing Address:
University of California, San Diego
458A EBU-II
9500 Gilman Drive, MC 0438
La Jolla, CA 92093-0438


Published Work:


|A.I1-10||A.I11-20||A.I21-30|A.I31-40|A.I41-50|A.I51-60|A.I61-70|A.I71-80|A81-90|
|AII|AIII|B.1-10|B.11-20|B.21-30|

A.I Published Articles

 
A.I-104
Y. Tao and, M. S. Tillack, "Mitigation of fast ions from laser-produced Sn plasma for an extreme ultraviolet lithography source" submitted to Appl. Phys. Lett..

A.I-103
Y. Tao, S. S. Harilal, M. S. Tillack, K. L. Sequoia, B. O'Shay, and F. Najmabadi, "Effect of focal spot size on in-band 13.5 nm extreme ultraviolet emission from laser-produced Sn plasma," accepted for publication in Optics Letters, 2006..

A.I-102
Y. Tao, M. S. Tillack, S. S. Harilal, K. L. Sequoia, B. O'Shay, and F. Najmabadi, "Effect of shockwave-induced density jump on laser plasma interactions in low-pressure ambient air," submitted to Appl. Phys. Lett..

A.I-101
S. S. Harilal, et al., "Ion debris mitigation from tin plasma using ambient gas, magnetic field and combined effects," submitted to Applied Physics B.

A.I-100
S. S. Harilal, Beau O'Shay, Yezheng Tao and Mark S. Tillack, "Ambient gas effects on the dynamics of laser-produced tin plume expansion," Journal of Applied Physics 99, 083303 (2006).

A.I-99
S. S. Harilal, M. S. Tillack, Y. Tao, B. O'Shay, R. Paguio and A. Nikroo, "Extreme ultraviolet spectral purity and magnetic ion debris mitigation with low density tin targets," Optics Letters 31 (10) 1549-1551 (May 15, 2006).

A.I-98
Farrokh Najmabadi, The ARIES Team: A. Abdou, L. Bromberg, T. Brown, V.C. Chan, M.C. Chu, F. Dahlgren, L. El-Guebaly, P. Heitzenroeder, D. Henderson, H.E. St. John, C.E. Kessel, L.L. Lao, G.R. Longhurst, S. Malang, T.K. Mau, B.J. Merrill, R.L. Miller, E. Mogahed, R.L. Moore, T. Petrie, D.A. Petti, P. Politzer, A.R. Raffray, D. Steiner, I. Sviatoslavsky, P. Synder, G.M. Syaebler, A.D. Turnbull, M.S. Tillack, L.M. Waganer, X. Wang, P. West, P. Wilson
"The ARIES-AT advanced tokamak, Advanced technology fusion power plant," Fusion Engineering and Design 80 (2006) 3-23.

A.I-97
Lester M. Waganer, Farrokh Najmabadi, Mark Tillack, Xueren Wang, Laila El-Guebaly, and The ARIES Team
"Design approach of the ARIES-AT power core and vacuum vessel cost assessment," Fusion Engineering and Design 80 (2006) 181-200.

A.I-96
R. Raffray, W. Meier, S. Abdel-Khalik, R. Bonazza, P. Calderoni, C. S. Debonnel, Z. Dragojlovic, L. El-Guebaly, D. Haynes, J. Latkowski, C. Olson, P. Peterson, S. Reyes, P. Sharpe, M. S. Tillack and M. Zaghloul, "IFE Thick Liquid Wall Chamber Dynamics: Governing Mechanisms and Modeling and Experimental Capabilities," Fusion Science and Technology 49 January 2006.

A.I-95
S. S. Harilal, J. O'Shay, M. S. Tillack, Y. Tao, R. Paguio, A. Nikroo and C. A. Back, "Spectral control of emissions from Sn-doped targets for EUV lithography," J. Phys. D: Applied Physics 39 (2006) 484487.

A.I-94
S. S. Harilal, J. O'Shay and M. S. Tillack, "Debris Mitigation in a Laser-Produced Tin Plume Using a Magnetic Field," J. Applied Physics 98, 1 (August 2005).

A.I-93
W. Kowbel and M. S. Tillack, "Hybrid Al/SiC composite optics for IFE applications," Fusion Science & Technology 47 (3), April 2005, 596-600.

A.I-92
S. S. Harilal, Beau O'Shay, Mark. S. Tillack and Manoj V. Mathew, "Spectroscopic Characterization of Laser-induced Tin Plasma," J. Applied Physics 98, 013306 (July 2005).

A.I-91
S. S. Harilal, B. O'Shay, M. S. Tillack, C. V. Bindhu, F. Najmabadi, "Fast photography of a laser generated plasma expanding across a transverse magnetic field," IEEE Transactions on Plasma Science 33 (2) April 2005, 474-475.

A.I-90
D.T. Goodin, N.B. Alexander, L.C. Brown, D.A. Callahan, P. Ebey, D.T. Frey, R. Gallix, D. Geller, C.R. Gibson, J. Hoffer, J.L. Maxwell, B.W. McQuillan, A. Nikroo, A. Nobile, C. Olson, R.W. Petzoldt, R. Raffray, W.S. Rickman, G. Rochau, D.G. Schroen, J. Sethian, J. Sheliak, J.E. Streit, M. Tillack, B.A. Vermillion, and E.I. Valmianski, "Demonstrating a Target Supply for Inertial Fusion Energy," Fusion Science & Technology 47 (4), April 2005, 1131-1138.

A.I-89
B. Christensen, A. R. Raffray, M. S. Tillack, "Modeling DT Vaporization and Melting in a Direct Drive Target," Fusion Science & Technology 47 (4), April 2005, 1180-1186.

A.I-88
B. Christensen, A. R. Raffray, M. S. Tillack, "Thermal Loading of a Direct Drive Target in Rarefied Gas," Fusion Science & Technology 47 (4), April 2005, 1175-1179.

A.I-87
F. Najmabadi, A. R. Raffray, and the ARIES-IFE Team: S. I. Abdel-Khalik, Leslie Bromberg, Laila A. El-Guebaly, D. Goodin, D. Haynes, J. Latkowski, W. Meier, R. Moore, S. Neff, C. L. Olson, J. Perkins, D. Petti, R. Petzoldt, D. V. Rose, W. M. Sharp, P. Sharpe, M. S. Tillack, L. Waganer, D.R. Welch, M. Yoda, S. S. Yu, M. Zaghloul, "Operational Windows for Dry-Wall and Wetted-Wall IFE Chambers," Fusion Sci. & Technology 46 (2004) 401-416.

A.I-86
Rulon Linford, Riccardo Betti, Jill Dahlburg, James Asay, Michael Campbell, Phillip Colella, Jeffrey Freidberg, Jeremy Goodman, David Hammer, Joseph Hoagland, Steve Jardin, John Lindl, Grant Logan, Keith Matzen, Gerald Navratil, Arthur Nobile, John Sethian, John Sheffeld, Mark Tillack, and Jon Weisheit, "A Review of the U.S. Department of Energy's Inertial Fusion Energy Program," Journal of Fusion Energy, Vol. 22, No. 2, June 2003.

A.I-85
D. T. Goodin, N. B. Alexander, L. C. Brown, D. T. Frey, R. Gallix, C. R. Gibson, J. L. Maxwell, A. Nobile, C. Olson, R. W. Petzoldt, R. Raffray, G. Rochau, D. G. Schroen, M. Tillack, W. S. Rickman and B. Vermillion, "A Cost-Effective Target Supply for Inertial Fusion Energy," Nuclear Fusion 44 No 12 (December 2004) S254-S265.

A.I-84
C. V. Bindhu, S. S. Harilal, M. S. Tillack, F. Najmabadi A. C. Gaeris, "Energy Absorption and Propagation in Laser Created Sparks," Applied Spectroscopy 58(6) (June 2004) 719-726.

A.I-83
S. S. Harilal, M. S. Tillack, B. O'Shay, C. V. Bindhu, F. Najmabadi, "Confinement and dynamics of laser-produced plasma expanding across a transverse magnetic field," Phys Rev. E 69 (2004).

A.I-82
C. V. Bindhu, S. S. Harilal, M. S. Tillack, F. Najmabadi A. C. Gaeris, "Laser Propagation and Energy Absorption by an Argon Spark," J. Applied Physics 94 no. 12 (15 Dec. 2003).

A.I-81
M. S. Tillack, D. Blair and S. S. Harilal, "The effect of ionization on cluster formation in laser ablation plumes," Nanotechnology 15, issue 3, pages 390 - 403 (January 2004).

 
A.I-80
A. R. Raffray, L. El-Guebaly, S. Malang, I. Sviatoslavsky, M. S. Tillack, X. Wang, and the ARIES Team,
"Advanced power core system for the ARIES-AT power plant," Fusion Engineering and Design 80 (2006) 79-98.

A.I-79
D.T. Goodin, A. Nobile, J. Hoffer, A. Nikroo, G. E. Besenbruch, L.C. Brown, J.L. Maxwell, W. R. Meier, T. Norimatsi, J. Pulsifer, W. S. Rickmann, W. Steckle, E. H. Stephens and M. Tillack, "Addressing the Issues of Target Fabrication and Injection for Inertial Fusion Energy," Fusion Engineering & Design 69 (2003) 803-806.

A.I-78
J. D. Sethian, M. Friedman, R. H. Lehmberg, M. Myers, S. P. Obenschain, J. Giuliani, P. Kepple, A. J. Schmitt, D. Colombant, J. Gardner, F. Hegeler, M. Wolford, S. B. Swanekamp, D. Weidenheimer, D. Welch, D. Rose, S. Payne, C. Bibeau, A. Bayramian, R. Beach, K. Schaffers, B. Freitas, K. Skulina, W. Meier, J. Latkowski, L. J. Perkins, D. Goodin, R. Petzolt, E. Stephens, F. Najmabadi, M. Tillack, R. Raffray, Z. Dragojlovic, D. Haynes, R. Peterson, G. Kulcinski, J. Hoffer, D. Geller, D. Schroen, J. Streit, C. Olson, T. Tanaka, T. Renk,G. Rochau, L. Snead, N. Ghoniem and G. Lucas "Fusion Energy with Lasers, Direct Drive Targets and Dry Wall Chambers," Nuclear Fusion 43 (2003) 1693-1709.

A.I-77
R. W. Petzoldt, D. T. Goodin, A. Nikroo, E. Stephens, N. Siegel, N. B. Alexander, A. R. Raffray, T. K. Mau, M. Tillack, F. Najmabadi, S. Krashenninikov and R. Gallix, "Direct Drive Target Survival During Injection in an Inertial Fusion Energy Power Plant," Nuclear Fusion 42 (2002) 1351-1356.

A.I-76
S. S. Harilal, C. V. Bindhu, M. S. Tillack, F. Najmabadi and A. C. Gaeris, "Internal Structure and Expansion Dynamics of Laser Ablation Plumes into Ambient Gases," Journal of Applied Physics 93, 5 (March 1, 2003) 2380-2388.

A.I-75
D.T. Goodin, A. Nobile, N.B. Alexander, L.C. Brown, J.L. Maxwell, J. Pulsifer, A.M. Schwendt, M. Tillack, and R.S. Willms, "A Credible Pathway for Heavy Ion Driven Target Fabrication and Injection," Laser and Particle Beams, vol. 20, no. 4, 2002.

A.I-74
M. S. Tillack, X. R. Wang, J. Pulsifer, S. Malang,
D. K. Sze, M. Billone, I. Sviatoslavsky, and the ARIES Team,
"Fusion power core engineering for the ARIES-ST power plant,"
Fusion Engineering and Design 65 (2003) 215-261.

A.I-73
H. Y. Khater, E. A. Mogahed, D. K. Sze, M. S. Tillack,
X. R. Wang and the ARIES Team
"ARIES-ST Safety Design and Analysis,"
Fusion Engineering and Design 63, 2003.

A.I-72
T. J. Renk, C. L. Olson, T. J. Tanaka, M. A. Ulrickson, G. A. Rochau, R. R. Peterson, I. E. Golovkin, M. O. Thompson, T. R. Knowles, A. R. Raffray and M. S. Tillack, "IFE Chamber Dry Wall Materials Response to Pulsed X-rays and Ions at Power-Plant Level Fluences," Fusion Engineering and Design 65 (2003) 399-406.

A.I-71
S. S. Harilal, C. V. Bindhu, M. S. Tillack, F. Najmabadi and A. C. Gaeris, "Plume Splitting and Sharpening in Laser-produced Aluminum Plasma," Journal of Physics D: Applied Physics 35 (2002) 2935-2938.

 
A.I-70
J. A. Boedo, D. Rudakov, R. Moyer, S. Krashenninikov, D. Whyte, G. McKee, G. Tynan, M. Schaffer, P. Stangeby, P. West, S. Allen, E. Hollman, A. Leonard, M. Tillack, R. Fonck, G. Antar,
"Transport by Intermittent Convection in the Boundary of DIII-D," Physics of Plasmas 8(11) 2001, pp. 4826-4833.

A.I-69
M. A. Abdou, A. Ying, N. Morley, K. Gulec, S. Smolentsev, M. Kotschenreuther, S. Malang, S. Zinkle. T. Rognlien, P. Fogarty, B. Nelson, R. Nygren, K. McCarthy, M. Z. Youssef, N. Ghoniem, D. Sze, C. Wong, M. Sawan, H. Khater, R. Wooley, R. Mattas, R. Moir, S. Sharafat, J. Brooks, A. Hassanein, D. Petti, M. Tillack, M. Ulrickson, T. Uchimoto
"On the Exploration of Innovative Concepts for Fusion Chamber Technology," Fusion Engineering and Design 54 (2001) 181-247.

A.I-68
R. F. Mattas, J. P. Allain, R. Bastasz, J. N. Brooks, T. Evans, A. Hassanein, S. Luckhardt, K. McCarthy, P. Mioduszewski, R. Maingi, E. Mogahed, R. Moir, S. Molokov, N. Morley, R. Nygren, T. Rognlien, C. Reed, D. Ruzic, I. Sviatoslavsky, D. Sze, M. Tillack, M. Ulrickson, P. M. Wade, R. Wooley, C. Wong,
"ALPS - advanced limiter-divertor plasma-facing systems," Fusion Engineering and Design 49-50 (2000) 127-134.

A.I-67
A. R. Raffray, L. El-Guebaly, S. Gordeev, S. Malang, E. Mogahed,
F. Najmabadi, I. Sviatoslavsky, D. K. Sze, M. S. Tillack,
X. R. Wang, and the ARIES Team,
"High Performance Blanket for ARIES-AT Power Plant,"
Fusion Engineering and Design, 58-59, November 2001, Pages 549-553.

A.I-66
R. Raffray, R. Jones, G. Aiello, M. Billone, L. Giancarli, H. Golfier, A. Hasegawa, Y. Katoh, A. Kohyama, S. Nishio, B. Riccardi and M. S. Tillack
"Design and Material Issues for High Performance SiCf/SiC-Based
Fusion Power Core,"
Fusion Engineering and Design 55 (2001) 55-95.

A.I-65
A. R. Raffray, L. El-Guebaly, S. Malang, I. Sviatoslavsky,
M. S. Tillack, X. Wang, and the ARIES Team,
"ARIES-AT Blanket and Divertor,"
Fusion Technology 39 (2001) 429-433.

A.I-64
D. K. Sze, K. A. McCarthy, M. Sawan, M. S. Tillack,
A. Ying and S. Zinkle,
"Flibe Assessments,"
Fusion Technology 39 (2001) 746-752.

A.I-63
M. S. Tillack, F. Najmabadi, L. A. El-Guebaly, D. T. Goodin,
W. R. Meier, J. Perkins, R. R. Peterson, D. A. Petti, K. R. Schultz,
J. D. Sethian, L. M. Waganer, and the ARIES Team,
"ARIES Inertial Fusion Chamber Assessment,"
Fusion Technology 39 (2001) 343-349.

A.I-62
D. K. Sze, M. S. Tillack, and L. El-Guebaly,
"Blanket system selection for the ARIES-ST,"
Fusion Engineering and Design 48 (2000) 371-378.

A.I-61
B. G. Logan, W. R. Meier, Ralph W. Moir, M. A. Abdou, P. F. Peterson,
G. L. Kulcinski, M. S. Tillack, J. F. Latkowski, David Petti,
K. R. Schultz, A. Nobile,
"Progress and Critical Issues for IFE Blanket and Chamber Research,"
Fusion Engineering and Design 51-52 (2000) p. 1095-1101.

 
A.I-60
M. S. Tillack, X. R. Wang, J. Pulsifer, I. Sviatoslavsky
and the ARIES Team,
"ARIES-ST Plasma-Facing Component Design and Analysis,
Fusion Engineering and Design 49-50 (2000) 363.

A.I-59
M. S. Tillack, X. R. Wang, J. Pulsifer, S. Malang, D. K. Sze,
and the ARIES Team,
"ARIES-ST Breeding Blanket Design and Analysis,"
Fusion Engineering and Design 49-50 (2000) 689.

A.I-58
C. C. Baker, R. W. Conn, F. Najmabadi, and M. S. Tillack,
"Status and Prospects for Fusion Energy from Magnetically Confined Plasmas,"
Energy 23 (7/8) pp. 649-694, 1998.

A.I-57
E. T. Cheng, R. Cerbone, M. Peng, J. D. Galambos, D. Strickler,
I. Sviatoslavsky, C. P. C. Wong, D. K. Sze, X. R. Wang, M. Simnad,
and M. S. Tillack,
"Progress of the ST-VNS Study,"
Fusion Technology 34 (3) 1998, p. 1066-1070.

A.I-56
R.F. Mattas, R. Bastasz, J. Brooks, A. Hassanein, S. Luckhardt,
K. McCarthy, P. Mioduszewski, E. Mogahed, R. Moir, N. Morely,
R. Nygren, C. Reed, D. Ruzic, I. Sviatoslavsky, D. Sze, M. S. Tillack,
P.M. Wade, K. Wilson, R. Wooley, C. Wong,
"U.S. Assessment of Advanced Limiter-divertor Plasma-facing
Systems (ALPS) - Design, Analysis, and R&D Needs,"
Fusion Technology 34 (3) 1998, p. 345-350.

A.I-55
Y. Hirooka and M. S. Tillack,
"Modular Application of Moving-Belt Plasma-Facing Components
for Particle and Heat Removal from a Steady-State Fusion System,"
Fusion Technology 34 (3) 1998, p. 946-950.

A.I-54
S. Malang, F. Najmabadi, L. M. Waganer, and M. S. Tillack,
"ARIES-RS Maintenance Approach for High Availability,"
Fusion Eng. and Design. 41 (1998) 377-383.

A.I-53
S. Malang, H. Schnauder, and M. S. Tillack,
"Combination of a Self-Cooled Liquid Metal Breeder
Blanket with a Gas Turbine Power Conversion System,"
Fusion Eng. and Design. 41 (Sept. 1998) 561.

A.I-52
E. T. Cheng, Y. K. Peng, R. Cerbone, P. Fogarty, J. D. Galambos,
E. A. Mogahed, B. Nelson, M. Simnad, I. Sviatoslavsky, and M. S. Tillack,
"Study of a Spherical Tokamak Based Volumetric Neutron Source,"
Fusion Engineering and Design 38(3) 219-255, Jan. 1997.

A.I-51
C. P. C. Wong, E. Chin, T. W. Petrie, E. E. Reis, M. S. Tillack,
X. Wang, I. Sviatoslavsky, S. Malang, D. K. Sze, and the ARIES Team,
"ARIES-RS Divertor System Selection and Analysis,"
Fusion Eng. and Design. 38 (1997) 115-137.

 
A.I-50
D. Steiner, L. El-Guebaly, S. Herring, H. Khater, S. Malang,
E. Mogahed, M. S. Tillack, R.Thayer, and the ARIES Team,
"ARIES-RS Safety Design and Analysis,"
Fusion Eng. and Design 38 (1997) 189-218.

A.I-49
M. S. Tillack, S. Malang, L. Waganer, X. R. Wang,
D. K. Sze, L. El-Guebaly, C. P. C. Wong, J. A. Crowell,
T. K. Mau, L. Bromberg, and the ARIES Team,
"Configuration and Engineering Design of the ARIES-RS Tokamak Power Plant,"
Fusion Eng. and Design. 38 (1997) 87-113.

A.I-48
R. W. Conn, F. Najmabadi, and M. S. Tillack,
"Prospects and Issues for Magnetic Fusion Power Systems,"
Fusion Eng. and Design. 39-40 (Sept. 1998).

A.I-47
M. S. Tillack and the ARIES Team,
"Engineering Design of the ARIES-RS Power Plant,"
Fusion Eng. and Design. 41 (1998) 491-499.

A.I-46
M. S. Tillack and the ARIES Team,
"Engineering Overview of ARIES-RS Tokamak Power Plant,"
Fusion Technology 1996, 1855.

A.I-45
D. K. Sze, M. S. Tillack, I. N. Sviatoslavsky,
L. A. El-Guebaly, C. P. C. Wong, L. M. Waganer, and the ARIES Team,
"Blanket Selection for the Starlite Project",
Fusion Technology 30 (3) 2A, Dec. 1996, 995.

A.I-44
M. S. Tillack, C. G. Bathke, L. A. El-Guebaly,
R. L. Miller, and the ARIES Team,
"Tradeoffs Between Improved Performance and Increased
Cost of Advanced Materials in Commercial Power Plants",
Fusion Technology 30 (3) 2B, Dec. 1996, 1594.

A.I-43
R. W. Conn, F. Najmabadi, M. S. Tillack, Y. Seki, Yu. A. Sokolov,
J. Cleveland, and V. V. Demchenko,
"Fusion Reactor Design and Technology,"
Nuclear Fusion, 34 (5), 1994 (pp. 747-768).

A.I-42
G. Federici, R. Matera, S. Chiocchio, D. Driemeyer, J. Haines,
M. S. Tillack, and M. Ulrickson,
"Innovative Design and Material Solutions of Thermal
Contact Layers for High-Heat-Flux Applications in Fusion",
Fusion Technology 26, 1994 (pp. 493-497).

A.I-41
M. S. Tillack, S. Sharafat, M. Youssef, S. Herring,
S. Malang, and D. K. Sze,
"Fusion Nuclear Technology and Materials: Status and R&D Needs,"
Fusion Eng. and Design 25 (1994) 21-34.

 
A.I-40
M. S. Tillack and R. D. Abelson,
"Interface Conductance Between Roughened Be and Steel
Under Thermal Deformation,"
Fusion Eng. and Design 27 (1995) 232-239.

A.I-39
M. S. Tillack and N. B. Morley,
"Flow Balancing in Liquid Metal Blankets,"
Fusion Eng. and Design 27 (1995) 735-741.

A.I-38
P. Gierszewski, M. Dalle Donne, H. Kawamura, and M. S. Tillack,
"Ceramic Pebble Bed Development for Fusion Blankets,"
Fusion Eng. and Design 27 (1995) 167-178.

A.I-37
N. B. Morley, A. Gaizer, M. S. Tillack and M. A. Abdou,
"Initial LM-MHD Thin Film Flow Experiments in the MeGA-Loop
Facility at UCLA,"
Fusion Engineering and Design 27 (1995) 725-730.

A.I-36
G. Federici, R. Matera, S. Chiocchio, J. Dietz, G. Janeschitz,
D. Driemeyer, J. Haines, M. S. Tillack, and M. Ulrickson,
"Design, Materials and R&D Issues of Innovative Thermal
Contact Joints for High Heat Flux Applications,"
Fusion Eng. and Design 28 (1995) 34-43.

A.I-35
Z. R. Gorbis, M. S. Tillack, F. Tehranian, and M. A. Abdou,
"Analysis of Wall-Packed Bed Thermal Interactions,"
Fusion Eng. and Design 27 (1995) 216-225.

A.I-34
J. E. Eggleston, M. A. Abdou and M. S. Tillack,
"Analysis of the Energy Transport and Deposition Within the
Reaction Chamber of the Prometheus Inertial Fusion Energy Reactor,"
Fusion Eng. and Design 27 (1995) 226-231.

A.I-33
M. A. Abdou, A. Y. Ying, M. S. Tillack, N. M. Ghoniem,
L. M. Waganer, D. E. Driemeyer, G. J. Linford, and D. J. Drake,
"Critical Technical Issues and Evaluation and Comparison Studies
for Inertial Fusion Energy Reactors,"
Fusion Engineering and Design 23 (1993) pp. 251-297.

A.I-32
F. Tehranian, M. A. Abdou, and M. S. Tillack,
"Effect of External Pressure on Particle Bed Effective Thermal Conductivity,"
J. Nucl. Mater. 212-215 (1994) 885-890.

A.I-31
N. B. Morley and M. S. Tillack,
"Examination of Stability Calculations for Liquid
Metal Film Flows in a Coplanar Magnetic Field,"
Magnetohydrodynamics. 2, 1993, pp. 69-75.

 
A.I-30
A. R. Raffray, M. S. Tillack, M. A. Abdou,
"Thermal Control of Ceramic Breeder Blankets,"
Fusion Technology 23 (3), May 1993, 281.

A.I-29
M. S. Tillack, A. R. Raffray, A. Y. Ying, M. A. Abdou, and P. Huemer,
"Experimental Studies of Active Temperature Control
in Solid Breeder Blankets,"
Fusion Eng. & Design 17 (1991) pp. 165-170.

A.I-28
A. R. Raffray, A. Y. Ying, Z. Gorbis, M. S. Tillack, M. A. Abdou,
"Thermal Control of Solid Breeder Blankets,"
Fusion Eng. & Design 17 (1991) pp. 131-137.

A.I-27
L. Bromberg and M. S. Tillack,
"Innovative Design Options for Internal Coils,"
Fusion Technology 19 (3), 921, May 1991.

A.I-26
A. Y. Ying and M. S. Tillack,
"MHD Heat Transfer in Elongated Rectangular Ducts for
Liquid Metal Blankets,"
Fusion Technology 19 (3), 990, May 1991.

A.I-25
N. B. Morley, M. S. Tillack and M. A. Abdou,
"Analysis of Thin Film Liquid Metal Protection of Fusion
Reactor Limiter/Divertor Surfaces,"
Fusion Technology 19 (3), 1765, May 1991.

A.I-24
T. Kunugi, M. S. Tillack, and M. A. Abdou,
"Analysis of Liquid Metal MHD Fluid Flow and Heat
Transfer Using the KAT Code,"
Fusion Technology 19 (3), 1000, May 1991.

A.I-23
M. A. Abdou, M. S. Tillack, and A. R. Raffray,
"Thermal, Fluid Flow and Tritium Release Problems in Fusion Blankets,"
Fusion Technology 18 (2) Sept. 1990 (pp. 157-200).

A.I-22
M. S. Tillack, "Examination of MHD Fluid Flow in Geometric
Elements of a Fusion Reactor Blanket Using the Core Flow Approach,"
Fusion Eng. & Design 8 (1989) p. A-173.

A.I-21
K. A. McCarthy, M. S. Tillack, and M. A. Abdou,
"Analysis of Liquid Metal MHD Flow Using an Iterative Method
to Solve the Core Flow Equations,"
Fusion Eng.&Design 8 (1989) pp. 256-264.

 
A.I-20
A. R. Raffray, M. A. Abdou, M. S. Tillack, M. Z. Youssef, and Y. Watanabe,
"Tritium-Producing Blanket for Fusion Engineering Facility,"
Fusion Eng. & Design 8 (1989) p. A-101.

A.I-19
A. Y. Ying, A. S. Lavine, and M. S. Tillack,
"The Effect of Hartmann and Side Layers on Heat Transfer in
Magnetohydrodynamic Flow,"
Fusion Technology, 15 (2), Part 2, pp. 1169-1173, March 1989.

A.I-18
A. R. Raffray, M. A. Abdou, P. Chou, Z. Gorbis, M. S. Tillack,
Y. Watanabe, and A. Ying,
"Helium-Cooled Solid Breeder Blanket for ITER,"
Fusion Technology, 15 (2), Part 2, pp. 858-863, March 1989.

A.I-17
Z. R. Gorbis, A. R. Raffray, M. S. Tillack, and M. A. Abdou,
"Thermal Resistance Gaps for Solid Breeder Blankets Using Packed Beds,"
Fusion Technology, 15 (2), Part 2, pp. 695-698, March 1989.

A.I-16
M. A. Abdou, A. R. Raffray, Z. R. Gorbis, M. S. Tillack,
Y. Watanabe, A. Y. Ying, M. Z. Youssef, and K. Fujimura,
"A Helium-Cooled Solid Breeder Concept for the Tritium-Producing
Blanket of the International Thermonuclear Experimental Reactor,"
Fusion Technology 15 (2), Part 1, March 1989, pp. 166182.

A.I-15
M. A. Abdou, A. H. Hadid, A. R. Raffray, M. S. Tillack, T. Iizuka,
P. J. Gierszewski, R. J. Puigh, D. K. Sze, and B. Picologlou,
"Modeling, Analysis, and Experiments for Fusion Nuclear Technology,"
Fusion Engineering and Design, 6, 1988 (pp. 3-64).

A.I-14
K. Taghavi, M. S. Tillack, and H. Madarame,
"Special Features of First Wall Heat Transfer in Liquid
Metal Fusion Reactor Blankets,"
Fusion Technology, 12 (1), July 1987.

A.I-13
M. A. Abdou, P. J. Gierszewski, M. S. Tillack, M. Nakagawa,
J. Reimann, D. K. Sze, J. Bartlit, J. Grover, R. Puigh, and R. T. McGrath,
"Technical Issues and Requirements of Experiments and Facilities
for Fusion Nuclear Technology,"
Nuclear Fusion, 27, (4) (1987) 619-688.

A.I-12
M.A. Abdou, P. Gierszewski, M. S. Tillack, A. R. Raffray,
D. K. Sze, and R. Puigh,
"Blanket Material and Engineering Issues, and Requirements
for Experiments and Facilities,"
Journal of Nuclear Materials 141-143, pp. 10-18, 1986.

A.I-11
M. S. Tillack, D. K. Sze, and M. A. Abdou,
"Required Momentum, Heat, and Mass Transport Experiments
for Liquid Metal Blankets,"
Fusion Technology 10 (3), p. 1088, November 1986.

 
A.I-10
M. Abdou, P. Gierszewski, M. S. Tillack, J. Grover, R. Puigh,
D. K. Sze, and D. Berwald,
"Technical Requirements of Experiments and Facilities for
Fusion Nuclear Technology,"
Fusion Technology 10 (3), p. 1065, November 1986.

A.I-9
H. Madarame and M. S. Tillack, "MHD Flow in Liquid Metal Blankets with Helical Vanes,"
Journal of the Faculty of Engineering, The University of Tokyo (B), 38, (4) (1986), pp. 1-18.

A.I-8
M. A. Abdou, P. J. Gierszewski, M. S. Tillack, K. Taghavi,
K. Kleefeldt, G. Bell, H. Madarame, Y. Oyama, D. H. Berwald,
J. K. Garner, R. Whitley, J. Straalsund, R. Burke, J. Grover,
E. Opperman, R. Puigh, J. W. Davis, G. D. Morgan, G. Deis,
M. C. Billone, K. I. Thomassen, and D. L. Jassby,
"A Study of the Issues and Experiments for Fusion Nuclear Technology,"
Fusion Technology, 8 (3), pp. 2595-2645, November 1985.

A.I-7
M. S. Tillack, M. S. Kazimi, and L. M. Lidsky,
"Measurement of Small Strains in a Noisy Environment,"
Review of Scientific Instruments 56 (9), pp. 1706- 1711, September 1985.

A.I-6
M. S. Tillack, M. S. Kazimi, and L. M. Lidsky,
"Structural Responses to Plasma Disruptions in Toroidal Shells,"
Fusion Technology 8 (1), pp. 239-244, July 1985.

A.I-5
H. Madarame, K.Taghavi, and M. S. Tillack,
"The Influence of Leakage Currents on MHD Pressure Drop,"
Fusion Technology 8 (1), pp. 264-269, July 1985.

A.I-4
J. K. Garner, J. Blanchard, G. Orient, K. Taghavi,
M. S.Tillack, M. Youssef, K. Shin, and H. Madarame,
"A Module for Testing a Lithium Cooled Tokamak Blanket in a Tandem Mirror Test Reactor,"
Fusion Technology 8 (1), pp. 962-967, July 1985.

A.I-3
M. S. Tillack, et al.
"Identification and Characterization of the Key Issues of Fusion Nuclear Technology,"
Fusion Technology 8 (1), pp. 1091-1099, July 1985.

A.I-2
P. Gierszewski, M. Abdou, G. Bell, J. Blanchard, M. Billone,
J. Garner, H. Madarame, G. Orient, K. Shin, K. Taghavi, M. S. Tillack
"Engineering Scaling and Quantification of the Test Requirements for Fusion Nuclear Technology,"
Fusion Technology 8 (1), pp. 1100-1108, July 1985.

A.I-1
M. S. Tillack and M. S. Kazimi,
"Modeling of Lithium Fires,"
Nuclear Technology/ Fusion, 2 (2), pp. 233-245, April 1982.

 


A.II Books and Book Chapters

A.II-3
N. B. Morley and M. S. Tillack,
"Magnetohydrodynamics,"
15th Standard Handbook for Electrical Engineers," McGraw-Hill, 2006.

A.II-2
M. S. Tillack and N. B. Morley,
"Magnetohydrodynamics,"
14th Standard Handbook for Electrical Engineers," McGraw-Hill, 1999.

A.II-1
M. S. Tillack, "Application of the Core Flow Approach to MHD Fluid Flow in
Geometric Elements of a Fusion Reactor Blanket,"
in Liquid Metal Magnetohydrodynamics, J. Lielpeteris and R. Moreau editors,
Kluwer Academic Publishers, Dordrecht 1989 (pp. 47-53).

 


A.III Refereed Conference Proceedings

A.III-16
B. O'Shay, F. Najmabadi, S. S. Harilal, M. Tillack "Nanosecond spectroscopy of expanding laser-produced tin plasma," The 8th International Conference on Laser Ablation, Banff, Canada, September 11-16, 2005 (submitted).

A.III-15
M. S. Tillack, K. L. Sequoia, J. O'Shay, C. A. Back and H. A. Scott, "Optimization of plasma uniformity in laser-irradiated underdense targets," Inertial Fusion Science and Applications 2005, Biarritz France, Sept. 2005 (submitted).

A.III-14
D.T. Goodin, A. Nobile, J. Hoffer, D. Geller, J. Sheliak, G.E. Besenbruch, N.B. Alexander, J. Maxwell, D. Schroen, J. Streit, R. Raffray, W. Rickman, M. Tillack, J. Sethian
"From One-of-a-Kind to 500,000 Per Day: The Challenge of Mass-Produced IFE Targets"
20th IAEA Fusion Energy Conference, Vilamoura, Portugal, Nov. 2004.

A.III-13
M. S. Tillack, S. S. Harilal, F. Najmabadi and J. O'Shay, "Magnetic Confinement of an Expanding Laser-Produced Plasma," Inertial Fusion Science and Applications 2003, Monterey CA, Sept. 2003 (pp. 319-322).

A.III-12
M. S. Tillack, J. Pulsifer and K. Sequoia, "UV Laser-Induced Damage to Grazing Incidence Metal Mirrors," Inertial Fusion Science and Applications 2003, Monterey CA, Sept. 2003 (pp. 810-814).

A.III-11
F. Najmabadi, R. Raffray, M. S. Tillack, Dan Goodin, Donald Haynes, Craig Olson, and the ARIES Team
Assessment of Chamber Concepts for Inertial Fusion Energy Power Plants - The ARIES-IFE study
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 701-705.

A.III-10
A. R. Raffray, D. A. Haynes, R. R. Peterson, M. S. Tillack, X. Wang and M. Zaghloul
Dry Chamber Wall Thermo-Mechanical Behavior and Lifetime under IFE Cyclic Energy Deposition
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 734-737.

A.III-9
J. E. Pulsifer, M. S. Tillack, D. Goodin and R. Petzoldt
"Thermal Control Techniques for Improved DT Layering of Indirect Drive IFE Targets"
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 802-805.

A.III-8
M. S. Tillack, S. A. Payne, N. M. Ghoniem, M. R. Zaghloul and J. F. Latkowski,
"Damage threats and response of final optics for laser-fusion power plants"
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 717-721.

A.III-7
W.R. Meier, D.T. Goodin, A. Nobile, G. Besenbruch, D. Haynes, J. Hoffer, J. Latkowski, J. Maxwell, F. Najmabadi, A. Nikroo, P. Peterson, R. Petzoldt, W. Rickman, J. Sethian, W. Steckle, E. Stephens, M. Tillack, A. Ying, and M. Yoda, "Addressing Key Science and Technology Issues for IFE Chambers, Target Fabrication and Target Injection," 19th IAEA Fusion Energy Conference, Lyon France, Oct. 14-19, 2002. (IAEA-CN-94/FT/1-3Ra).

A.III-6
D. Blair and M. S. Tillack
"Particle Formation and Dynamics in the Laser Ablation Plume,"
SPIE Conference on Micromachining and Microfabrication 21 - 25 October 2001, San Francisco, CA.

A.III-5
F. Najmabadi, S. Jardin, M. S. Tillack, R. Miller, T. K. Mau,
R. Stambaugh, D. Steiner, L. Waganer and the ARIES Team,
"The ARIES-ST Study: Assessment of the Spherical Tokamak Concept,"
17th IAEA Fusion Energy Conference, Yokohama, 1998.

A.III-4
M. A. Abdou, M. Peng, S. Berk, A. Ying, M. S. Tillack, et al.,
"Requirements and Design Envelope for Volumetric Neutron
Source Fusion Facility for Fusion Nuclear Technology Development,"
15th IAEA International Conference on Plasma Physics and
Controlled Nuclear Fusion Research, IAEA-CN-60/F-II-6 (Oct. 1994).

A.III-3
M. A. Abdou, M. S. Tillack, and A. R. Raffray,
"Thermomechanical Problems in Fusion Reactor Blankets,"
Proceedings of the Fourth International Topical Meeting
on Nuclear Reactor Thermal-Hydraulics, Karlsruhe FRG, Oct. 10-13, 1989.

A.III-2
D. K. Sze, M. A. Abdou, M. S. Tillack, P. J. Gierszewski, and R. Puigh,
"Technical Requirements of Experiments and Facilities for Fusion
Blanket Development,"
International Symposium on Fusion Reactor Blanket
and Fuel Cycle Technology, Japan, October 1986.

A.III-1
M. A. Abdou, P. J. Gierszewski, M. S. Tillack, R. Puigh,
D. K. Sze, and M. Nakagawa,
"Fusion Nuclear Technology Testing Requirements,"
Proceedings of the IAEA Fourth International Technical
Committee Meeting and Workshop on Fusion Reactor Design and
Technology, Yalta, May 26-June 6, 1986 (pp. 151-186).


B. Unrefereed Conference Proceedings

 
B-24
M. S. Tillack, D. T. Goodin, N. B. Alexander, R. W. Petzoldt, A. R. Raffray, D. Schroen, J. D. Sethian and J. E. Streit, "A Target Fabrication and Injection Facility for Laser-IFE," 20th IEEE/NPSS Symposium on Fusion Engineering (SOFE), October 14-17, 2003, San Diego, CA.

B-23
M. R. Zaghloul, M. S. Tillack, and T. K. Mau
"Sensitivity of Metal Mirrors to Laser-Induced Damage Under Long-Term Exposure at Shallow Angle of Incidence"
Proc. 19th IEEE/NPSS SOFE, Atlantic City NJ, Oct. 2-5, 2001.

B-22
T. K. Mau, M. S. Tillack, and M. R. Zaghloul, "Modeling of Mirror Surface Damage Effects on Beam Propagation in a Laser-Driven IFE Power Plant", Proc. 19th IEEE/NPSS SOFE, Atlantic City NJ, Oct. 2-5, 2001.

B-21
W. Meier, M. Abdou, G. Kulcinski, R. Moir, A. Nobile, P. Peterson,
D. Petti, K. Schultz, M. S. Tillack and M. Yoda,
"Overview of IFE Chamber and Target Technologies R&D in the U.S.,"
proceedings of the 18th IAEA Fusion Energy Conference,
Sorrento Italy, Sept. 2000.

 
B-20
X. R. Wang, M. S. Tillack, F. Najmabadi, S. Malang and the ARIES Team,
"Configuration and Maintenance of the ARIES-ST Power Plant,"
Proceedings of the 18th IEEE/NPSS Symposium on Fusion Engineering,
Albuquerque, NM, Oct. 1999.

B-19
A. R. Raffray, L. El-Guebaly, D. K. Sze, M. Billone,
E. Mogahed, F. Najmabadi, I. Sviatoslavsky, M. S. Tillack,
X. Wang and the ARIES Team,
"SiC/SiC Composite for Advanced Fusion Power Plant Blanket,"
Proceedings of the 18th IEEE/NPSS Symposium on Fusion
Engineering, Albuquerque, NM, Oct. 1999.

B-18
M. S. Tillack and N. Basu,
"Simulation of gas dynamic behavior in dry-wall inertial
fusion energy chambers,"
Proceedings of the 18th IEEE/NPSS Symposium on
Fusion Engineering, Albuquerque, NM, Oct. 1999.

B-17
X. R. Wang, F. Najmabadi and M. S. Tillack,
"Configuration and Maintenance Options for Low Aspect Ratio Tokamaks,"
17th IEEE/NPSS Symposium on Fusion Engineering, San Diego, CA, Oct. 1997.

B-16 (html)
M. S. Tillack and S. Malang,
"High-Performance PbLi Blanket,"
17th IEEE/NPSS Symposium on Fusion Engineering, San Diego, CA, Oct. 1997.

B-15 (html)
Y. Hirooka, M. S. Tillack, and A. Grossman,
"Steady-State Impurity Control, Heat Removal and Tritium
Recovery by Moving-Belt Plasma-Facing Components,"
17th IEEE/NPSS Symposium on Fusion Engineering, San Diego, CA, Oct. 1997.

B-14 (html)
L. M. Waganer, F. Najmabadi, M. S. Tillack, and the ARIES Team,
"What Must Demo Do?,"
16th IEEE/NPSS Symposium on Fusion Engineering,
Champaign IL, Oct. 1995 (IEEE/95CH35852) pp. 1157-1161.

B-13 (html)
M. S. Tillack, M. Billone, L. El-Guebaly, D. K. Sze,
L. M. Waganer, C. Wong, and the ARIES Team,
"Engineering Options for the U.S. Fusion Demo,"
16th IEEE/NPSS Symposium on Fusion Engineering,
Champaign IL, Oct. 1995 (IEEE/95CH35852) pp. 1202-1205.

B-12
X. R. Wang, D. K. Sze, M. S. Tillack, and C. P. C. Wong,
"Heat Flux Limits on the Plasma-Facing Components of a
Commercial Fusion Power Plant,"
16th IEEE/NPSS Symposium on Fusion Engineering,
Champaign IL, Oct. 1995 (IEEE/95CH35852) pp. 1206-1209.

B-11
M. S. Tillack, N. Ghoniem, A. R. Raffray, M. A. Abdou,
"The Prometheus IFE Reactor Cavity,"
15th IEEE/NPSS Symposium on Fusion Engineering,
Hyannis MA, Oct. 1993 (pp. 993-996).

 
B-10
M. A. Abdou, A. Y. Ying, M. S. Tillack, et al.,
"Research and Development Assessment for Prometheus Heavy
Ion and Laser Driven Inertial Fusion Reactor Designs,"
15th Symposium on Fusion Engineering, Hyannis MA, Oct. 1993 (pp. 989-992).

B-9
M. S. Tillack, et al.,
"Design and Analysis of the PROMETHEUS Wetted Wall IFE Reactor Cavity,"
14th IEEE/NPSS Symposium on Fusion Engineering,
San Diego, California, October 1-3, 1991 (pp 223-226).

B-8
A. R. Raffray, Z. R. Gorbis, A. Badawi, M. S. Tillack, et al.,
"Model for Determing the Effective Thermal Conductivity of
Particle Beds with High Solid-to-Gas Thermal Conductivity Ratios,"
13th IEEE/NPSS Symposium on Fusion Engineering, Knoxville TN,
October 1989, IEEE-89CH2820-9, Vol.1, pp. 66-69.

B-7
M. S. Tillack, A. Y. Ying, C. Tickle, A. R. Raffray, and M. A. Abdou,
"Experimental Study of the Effective Thermal Conductivity of
a Packed Bed as a Temperature Control Mechanism for ITER
Ceramic Breeder Blanket Designs,"
13th IEEE/NPSS Symposium on Fusion Engineering,
Knoxville TN, October 1989, IEEE-89CH2820-9, Vol.1, pp. 70-73.

B-6
M. S. Tillack, A. Y. Ying, and H. Hashizume,
"The Effect of Magnetic Field Alignment on Heat Transfer in
Liquid Metal Blanket Channels,"
13th IEEE/NPSS Symposium on Fusion Engineering,
Knoxville TN, October 1989 (pp. 376-379).

B-5
M. A. Abdou, M. S. Tillack, and A. R. Raffray,
"Time-Related Parameters in a Fusion Engineering
Facility for Nuclear Technology Testing,"
Proceedings of the 12th IEEE/NPSS Symposium on Fusion
Engineering, Monterey, California, October 12-16, 1987 (pp. 509-512).

B-4
R. F. Mattas, C. C. Baker, Y. Cha, P. A. Finn, S. Majumdar,
B. F. Picologlou, D. K. Sze, H. Stevens, M. A. Abdou,
E. Cheng, A. Hadid, R. Raffray, M. S. Tillack, et al.,
"Blanket Module Testing in TIBER,"
Proceedings of the 12th IEEE/NPSS Symposium on Fusion
Engineering, Monterey, California, October 12-16, 1987 (pp. 1279-1282).

B-3
M. A. Abdou, P. J. Gierszewski, and M. S. Tillack,
"Fusion Nuclear Technology Experiments and Facilities,"
Proceedings of the 11th Symposium on Engineering Problems
of Fusion Research, Austin TX, November 18-22, 1985 (pp. 732-737).

B-2
M. S. Tillack,
"Eddy Current Analysis in Multiply Connected Shells
Using a Circuit Network Model,"
Proceedings of the 11th Symposium on Engineering Problems
of Fusion Research, Austin TX, November 18-22, 1985 (pp. 1056-1059).

B-1
M. A. Firestone, D. I. Brown, C. Kessel, and M. S. Tillack,
"Eddy Current Models for a Tokamak Reactor Vessel and Blanket/Shield,"
Proceedings of the 11th Symposium on Engineering Problems of
Fusion Research, Austin TX, November 18-22, 1985 (pp. 1054-1055).