The High Average Power Laser Program


[Home] [Bibliography] [Meeting Summaries] [Meeting Archives] [Program Summaries] [Working Documents]

The High Average Power Laser Program is a coordinated, focussed multi-lab effort to develop the science and technology for a Laser Inertial Fusion Energy (Laser IFE). The program has been established by scientists at national labs, universities and industry.1

Fusion is the power source of the sun. It is the energy released when two isotopes of hydrogen are combined, or "fused", to produce a heavier atom (helium) and energy. If fusion could be harnessed on Earth, the power plant would have unlimited fuel (the ingredients are deuterium, a hydrogen isotope, and lithium, a plentiful element), no chemical by-products, and no long-term radioactive waste. The payoffs are so large that numerous scientific institution world-wide have been working on this problem. However after almost 50 years the solution is still elusive and challenging. In the approach we are pursuing, an array of intense lasers symmetrically and directly illuminates a cryogenic target that has been injected into the chamber. The target is compressed and heated to undergo thermonuclear burn. The energy released by the target is recovered by the chamber wall and converted into electricity. A schematic appears below:


1Participants in this program are:
DoD/DoE Labs: Naval Research Laboratory, Lawrence Livermore National Laboratory, Sandia National Laboratory, Los Alamos National Laboratory, Oak Ridge National Lab, Princeton Plasma Physics Laboratory, Argonne National Laboratory, and Idaho National Engineering Laboratory
Industry: General Atomics, Titan-Pulse Sciences Division, Schafer Corp, Science Applications International Corp, Northrop-Grumman, Coherence, Inc. Commonwealth Technology, Inc.
University: University of California, San Diego, University of Wisconsin, University of California, Los Angeles, and University of Rochester Laboratory for Laser Energetics

 

The attractiveness of this approach lies in its inherent simplicity, its separable architecture, and the modular nature of the laser driver. The targets are spherical shells. In principal, they can be fabricated in a single droplet generator and thus naturally lend themselves to automated, low cost, production. There is no hohlraum debris to recycle. The first wall is a passive structure that does not have to hold vacuum. Thus it can be made in individual sectors that can be replaced during the plant lifetime. Not having to worry about vacuum integrity allows more choices for the first wall, such as advanced composites or two-component structures. The separable nature of the power plant significantly lowers development costs (the components can be fully developed separately before being integrated into the system), and just as importantly, allows economical upgrades as new technologies are developed. The modular laser would consist of a number (20-40) of identical parallel beam lines. Hence it is only necessary to develop one of these lines to develop the entire system. This also significantly reduces development costs.

While there are many science and engineering challenges that must be met to realize this concept, there have already been sufficient advances in target design, target experiments, lasers, and associated technologies to make this a promising viable energy source: High gain target designs are under development that promise sufficient gain (120-400) for a fusion power plant. Two laser concepts have been identified: Krypton fluoride lasers (KrF), under development at NRL, and diode pumped solid-state lasers (DPSSL) under development at LLNL. Both have the potential to meet the fusion energy requirements for efficiency, durability and cost. Power plant studies have shown that this can be an economically attractive approach. We believe the concept looks sufficiently attractive that we have forged a phased, relatively fast-paced program to evaluate the major uncertainties. In 1999 and 2000 the program concentrated on the two laser concepts. Since 2001 the program has expanded to address all the critical components in Laser IFE, including target fabrication, target injection, final optics, and fusion chamber research.

The Laser IFE Program

The Laser IFE Program follows four key overarching principles:

  1. It is a coordinated, integrated effort in which all the components of Laser IFE are developed in concert with one another. This "systems approach" ensures that Laser IFE is developed as a coherent system.
  2. The program addresses issues that are unique to Laser IFE, and leaves generic fusion issues (e.g. blankets, breeders, safety, etc.) to the much larger fusion program and to future research.
  3. The program stresses experimental validation and predictive capability.
  4. It is a three-phase program that starts off at low cost with an emphasis on research and development, and ends with a power plant-size testing facility. To advance from one phase to the next requires that specific milestones and goals be met.
    1. "Phase I" will perform the cutting edge R & D necessary to evaluate and develop this approach. The goal of Phase I is to establish the technology required for the lasers, target fabrication, target injection, chambers, and final optics, as well as to identify one or more credible chamber concepts. We will also establish a credible suite of high gain target designs suitable for fusion energy.
    2. "Phase II" is the Integrated Research Experiment (IRE). The IRE will provide an integrated demonstration that the main laser IFE components can operate together in a predictable manner and that the performance will scale to a fusion power plant. It would include a full-scale power-plant sized laser module and a target injector. The laser will meet the IFE requirements for rep-rate, efficiency, and uniformity, and it will be steered to hit the injected targets with the required precision. As the single laser module would not have sufficient energy to produce fusion reactions, the IRE will not require advanced materials, per se. However, it will be used to evaluate some aspects of candidate chamber materials. The IRE will also be used to study chamber dynamics and clearing. In a separate facility, we will demonstrate that fully layered cryogenic DT targets can survive injection into a chamber that replicates the IFE chamber environment (wall temperature, background gas, etc.) In addition to the IRE, Phase II will also include a detailed point design for an economically and environmentally attractive Laser IFE fusion power plant.
    3. "Phase III" is the Engineering Test Facility (ETF). It would be the first Laser IFE facility to repetitively produce significant thermonuclear burn. The ETF would test and validate the materials and components for an IFE Power Plant in a full-scale repetitive fusion environment. The ETF would be a modular device. Hence, it can be used to test and validate more than one chamber concept, blanket configuration, or final optics system. It would also have operational flexibility. It could run in burst mode tests at high yield and full rep-rate to demonstrate high gain targets and chamber response to high yield target emissions. Long-term testing could be done at lower yield and/or rep-rate in order to keep the heat transfer and conversion costs lower. The exact specifications of the ETF must await the R&D that will take place in Phases I and II. Nevertheless, we can give an overall scale of the facility. We would expect the laser energy to be between 1.4-2.0 MJ, with a gain of approximately 120, and a fusion output of between 160 to 240 MJ. This system would require complete thermal management. Thus it could also demonstrate fusion electrical power. Once the chamber concept was validated, it may be possible to use the ETF driver with new full-scale chamber and plant components in a demonstration power plant.